4pcs Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger PCB Module Board with Protection DIY USB Power Bank Board
4pcs Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger PCB Module Board with Protection DIY USB Power Bank Board by MakerFocus at Website Designing Company. MPN: 11M58Y46PRX18ROU. Hurry! Limited time offer. Offer valid only while supplies last. Note:1. The B+ and B- connected to the boosted battery must not be reversed.2. Long press the switch, the manboard will turn on the USB output,long
1. The B+ and B- connected to the boosted battery must not be reversed.
2. Long press the switch, the manboard will turn on the USB output,long press it again to turn off the USB output; Press the switch twice to turn on the lamp, and press twice again to turn off the lamp
3. When use the board at first time, please connect 5V power adapter to the micro USB port to activate the board.
It support multi battery in parallel connection.
How to choose the right battery:
The battery should be flat 18650 battery, 65mm long, pointed battery can not be used. If you use old batteries, different capacities, different brands are not available, disassemble the battery to ensure that each voltage is at least 3.5V or more, if the voltage is too low, then you can put it into the battery. (Note: You can also use lithium battery, mobile phone tablet battery)
How to distinguish between battery +-pole and power box +-pole:
In general, the 18650 battery has a negative electrode in the plane, and a positive hole in the hole. Must not be installed anti-battery, anti-burn once installed, and then loading pairs is useless.
Why is there no power output after the battery is installed:
After installing the battery, you must plug in the 5V charger to activate it.
4 * Charging Module Dual USB
Features & Highlights
- Charge indication: IN letters will appear on the charging display. Output load indication: After the load is connected, long press the LED light button, the output starts, the display will appear OUT letters and relative output voltage and current 5V1A or 5V2.1A.
- Protection function: The protection circuit of the boosted lithium battery has been integrated to prevent over-discharge, over-charge, and overload. Can receive a section of lithium battery can also be connected in parallel multi-section lithium battery. Power Capacity Display:0-100%.
- The capacity does not exceed 200,000 milliamps and the voltage of 3.-4.2V can be used.Lithium positive electrode B+ lithium negative electrode B-. Note: The B+ and B- connected to the boosted battery must not be reversed. Features:Size: 58MM*27MM*15MM. Input Port:micro USB. Input Power Supply: DC 5V. Output Power Supply: DC 5V 1A 2.1A. Power Conversion:85%. protection:overcharge protection,overdischarge protection, short circuit protection,over current protection,over temperature protection.
- Why can't charge charge to 99%: If it is a new battery, the battery is discharged for the first time (that is, the mobile phone is charged) and the inside of the battery is turned off, and then the battery can be charged up to 100% after recharging. If it is an old battery, it is discharged and recharged once. If it is still not, it is caused by a large internal resistance of the battery and an inconsistent capacity.
- Why did you just install the battery and the percentage was not displayed, and obviously only 50% of the batteries were loaded to show 80%: The first time the battery is discharged, the battery is discharged (ie, the phone is charged). The inside of the battery is turned off, and then the battery is recharged and the balance is displayed. All digital power supplies are like this.
|Item Weight:||0.04 pounds|
|Item Size:||1.1 x 0.59 x 0.59 inches|
|Package Weight:||0.11 pounds|
|Package Size:||3.66 x 1.18 x 1.18 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by MakerFocus, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: I2GA2914KA02HAQ1DD, ean: 0190033873068,
ESP32 Development Board WIFI Bluetooth LoRa Dual Core 240MHz CP2102 with 0.96inch OLED Display and 433/470MHz Antenna for ArduinoDescription:WIFI Kit series is the new development cost-effective networking program of our company, the main chip using ...
Soetta ePaper/eInk SPI Display Module (2.13" Red, Black & White SPI Display)...
mpn: LD8, ean: 4676483114723,
YEHUA LD8 lightning to HDMI Cable Mirroring Screen lightning cable to TV Casting Plug and Play 1080P iPhone to HDMI Cable Support IOS device (iphone ipad )by Airplay. How to use: 1. Plug Lightning cable to your Cellphone or Tablet directly. 2. Plug ...
By Heltec Automation
mpn: HTIT-WB32, ean: 0755082939037,
Pin header no welding in default!if need welded pls contact us before order. ESP Kit HTIT series manual (example code include) download link :https://pan.baidu.com/s/1kVuZHdl WIFI Kit series is the new development of the cost-effective networking ...
mpn: 4336298378, ean: 0702795764470,
LoRa OLED Board: Main chip: espressif esp32 and SX1276 Operating voltage: 3.3V to 7V Flash:32M-Bits Main Frequency:240MHZ Support frequency:868-915MHZ Lora chip:SX1276 Distance: about 2.8KM in open place Computing power: 600DMIPS Dual-mode Bluetooth:...
mpn: K8-W, ean: 4853125720898,
Note 1: The WiFi Wireless Display Receiver uses Miracast standard Protocol. Due to the Netflix and YouTube videos which are encrypted, the product will cannot achieve the function of projecting your Smart Phones / Tablet PC to another big screen devi...
mpn: 43272-227, ean: 4853125719489,
Do you want to play games or enjoy videos entertament in big screen? Are you distressed with small screen in daily life? 1.Want to protect eyesight of your families? 2.Want to share News,funny videos,games with your friends and families in big screen...
mpn: K4-B1, ean: 4853125719632,
1.TV Screen: After connected all port well, then TV will show screen with SSID, PSK, IP Address.(ports including: USB charger port,HDMI Port,external antenna port). Below Screen, it will show waiting for connection. please ignore it. 2.Device do not ...
mpn: K2, ean: 4853125720096,
YEHUA K2 Wifi Display Transimitter 1080P Wireless Display Dongle for Projector HDMI Display Adapter Main Features: 1. Supports 3 different transmission paths (Miracast, DLNA, Airplay) Airplay for iOS 8.0 and above (also works on iOS 11) Miracast fo...
mpn: FZ2886+FZ2891, ean: 0702795764296,
Product Description: Main chip: espressif esp32 and SX1276 Operating voltage: 3.3V to 7V Flash:32M-Bits Main Frequency:240MHZ Support frequency:868-915MHZ Lora chip:SX1276 Distance: about 2.8KM in open place Computing power: 600DMIPS Dual-mode Blueto...