Beevivo 25m x 20mm x 0.25mm Double Side Adhesive Thermal Tape for Heatsinks , LED Lights, IC Chip, Computer CPU, GPU ,Modules
Super Savings Item! Save 36% on the Beevivo 25m x 20mm x 0.25mm Double Side Adhesive Thermal Tape for Heatsinks , LED Lights, IC Chip, Computer CPU, GPU ,Modules by BEEVIVO at Website Designing Company. MPN: 43237-2. Hurry! Limited time offer. Offer valid only while supplies last. Thermal tape adhesive can satisfy thermal conducting and cooling needs for high-end electronic products. At low cost solve the problem of both good
Glass fiber thickness: 0.25mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Applicable temperature range:-30~+150 °C
Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (80-120℃ ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion. In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
1 Roll Thermal Conductive Tape Double-sided Adhesive
Features & Highlights
- Double sided thermal tape have both good thermal conductivity and strong stickiness, which solve heat dissipaion problem for many electronicsat at low cost .
- Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
- The thermal conductive tape make the aluminum heat sink and any device surface bonding ,like for IC chip , high power LED, to achieve replaced screws-fixed, thereby achieving the most effective heat dissipation.
- Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
- The themal tape is good choice for high power LED,automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high power welder, display, computer, Video Card RAM, Memory Modules, SSD drives, solar,so on.
|Item Weight:||0.4 pounds|
|Package Weight:||0.39 pounds|
|Package Size:||6.6 x 0.8 x 0.8 inches|