SainSmart 3.2" TFT LCD Display +FT LCD Adjustable Shield for Arduino UNO Mega2560 R3 (General)
Free Shipping Included! SainSmart 3.2'' TFT LCD Display +FT LCD Adjustable Shield for Arduino UNO Mega2560 R3 (General) by SainSmart at Website Designing Company. MPN: C45. Hurry! Limited time offer. Offer valid only while supplies last. 3.2'' TFT LCD Display is a LCD touch screen module. It has 40pins interface and SD card and Flash reader design. It is a powerful and multifunctional
3.2" TFT LCD Display is a LCD touch screen module. It has 40pins interface and SD card and Flash reader design. It is a powerful and multifunctional module for your project. The Screen include a controller SSD1289, it's a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. It is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.
3.2 TFT LCD shield works in 3.3V voltage level and you need to use cables to connect with Mega. And this shield can help you out of the bothers to use other cables. You just need to plug the module to Mega through this shield.
It supports both 16 bit mode. And Mega board has enough pins for using SD card and touch function at the same time. It also has an adjustable button for contrast of the LCD display.
MEGA 2560 Board is based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
MEGA2560 R3 uses an ATMega16U2 which allows for faster transfer rates and more memory. No drivers needed for Linux or Mac, and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. It also adds SDA and SCL pins next to the AREF. The MEGA2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.ns.
NOTE: Below is the documentation.
Features & Highlights
- SainSmart 3.2" TFT LCD Display+Touch Panel+PCB adapter SD Slot
- SainSmart TFT LCD Adjustable Shield
- SainSmart Mega2560/Mega 2560 R3
|Package Weight:||0.2 pounds|
|Package Size:||5.2 x 1.2 x 1.2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by SainSmart, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By XYG-Raspberry Pi
mpn: LYSB00PVHZJVW-ELECTRNCS, ean: 0701203232631,
4 inch Touch Screen TFT LCD Designed for Raspberry Pi Features Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor Supports any revision of Raspberry Pi (directly-pluggable) Driver provided (works with custom Raspbian direc...
Measuring range: DC 0.0 - 99.9VLoad capacity: max load capacity of relay's normally open port: DC 0 - 30V / 10A, AC 0 - 250V / 10A; max load capacity of relay's normally closed port: DC 0 - 28V / 10A, AC 0 - 125V / 10AModule functions:Function 1:Volt...
Features Resistive touch screen TFT LCD, 4inch, 480x320 resolution Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO Onboard stand-alone touch controller, better touching than solu...
mpn: 923-00093, ean: 0706973546001,
Please check the pictures and description carefully before bidding. Description: Compatible Model Numbers: Apple iMac 27" A1419 Retina 5K ( Late 2014 - Mid 2015 ) Compatible Part Number: 923-00093 Package included: 1 x LCD LED LVDS Display Cab...
mpn: ADA2088, ean: 0711978442807,
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microco...
mpn: 7.5inch e-Paper HAT (D), ean: 0662211488864,
7.5inch E-Ink display Specifications Operating voltage: 3.3V Interface: SPI Outline dimension: 170.2mm x 111.2mm Display size: 163.2mm x 97.92mm Dot pitch: 0.255 x 0.255 Resolution: 640 x 384 Display color:red, black, white Grey level: 2 Full refresh...
Please check the pictures and description carefully before bidding. Description: Compatible models: iMac 27" A1312 2009 2010 Identifying Numbers: Apple Part #: 922-9168 Manufacturer Part #: 593-1281 593-1028 Package include: -1* LVDS Display Cable...
mpn: 1.44inch LCD HAT, ean: 0615311268720,
Overview This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface. Trying to add a control interface for your Pi? Even making the Pi into a handheld game console? This ...
mpn: X890707-001, ean: 0751940814560,
Description: New replacement tablet lcd lvds video flex cable. Compatible Part #'s: X890707-001 Compatible Models: Microsoft Surface Pro 3 1631Compatible Model Numbers: Microsoft Surface Pro 3 1631. Replacement and high quality,Replace your faul...
mpn: A1278 2012 LCDS Cable, ean: 0667581437382,
Please check the pictures and description carefully before bidding. Description: Compatible Model Numbers: Apple Macbook Pro 13" Unibody A1278 Mid 2012 ( MD101 MD102 ) Compatible Part Number: / Package included: 1 x LVDS LCD Display LED Screen ...